Demountable Classroom Tie-Down Anchoring at William Clarke College
Project Overview
Anchoring Rope and Rigging was engaged to provide a complete tie-down anchoring system for 12 demountable classrooms installed at William Clarke College in Kellyville, New South Wales.
The new classrooms were positioned on the school’s main field as part of an expansion of the college’s teaching facilities. Although demountable buildings offer a fast and flexible way to increase classroom capacity, they must still be securely restrained against the wind uplift and lateral forces applicable to the site.
A total of 48 HULK percussion-driven earth anchors were installed, proof tested, tensioned and connected to the underside of the buildings. The entire anchoring installation was completed in one morning.
Project Details
Application: Demountable building tie-down anchoring Structures secured: 12 demountable classrooms Anchor quantity: 48 HULK Earth Anchors Anchor capacity: 20 kN Scope: Installation, proof testing, tensioning and termination Installation duration: One morning
The Brief
William Clarke College required a dependable tie-down system for 12 new demountable classrooms installed on the main school field.
The anchoring system needed to provide secure restraint at engineered locations beneath the buildings while allowing the installation to be completed quickly and with minimal disruption to the school site.
The scope required Anchoring Rope and Rigging to:
- Install the earth anchors at the nominated tie-down positions
- Verify the performance of the installed anchors
- Tension the complete restraint system
- Connect the anchors to the underside of the classrooms
- Complete the work efficiently within a restricted construction program
The completed system also needed to satisfy the structural loading requirements applicable to the buildings and their location.
The HULK Earth Anchoring Solution
HULK percussion-driven earth anchors were selected to provide the required tie-down points.
A total of 48 anchors, each with a specified capacity of 20 kN, were installed at precisely engineered intervals around and beneath the 12 classrooms.
Once driven into the ground, each anchor was set to develop its mechanical resistance within the surrounding soil. The anchors were then proof tested to verify their installed holding capacity before being connected to the building restraint system.
The tendons were tensioned and terminated directly to the underside of the demountable structures, creating a positive connection between the buildings and the ground.
This provided restraint against both uplift and lateral movement without requiring large concrete footings or extensive excavation.
Rapid Installation
One of the key advantages of the HULK system was the speed with which the complete installation could be carried out.
All 48 anchors were:
- Installed
- Proof tested
- Tensioned
- Connected to the classrooms
The entire scope was completed in a single morning.
This rapid installation reduced disruption to the wider construction program and allowed the demountable classrooms to be secured without lengthy concrete curing periods or substantial civil works.
Because the anchors develop capacity immediately after installation and testing, the tie-down system could be placed into service as soon as the work was completed.
Proof Testing and Verification
Proof testing formed an essential part of the installation process.
Rather than relying solely on theoretical soil capacities, the installed anchors were tested on site to verify that they achieved the required resistance in the actual ground conditions.
This provided direct confirmation of the performance of each tie-down point before the classrooms were handed over.
Following successful testing, the anchor tendons were tensioned and terminated to the underside of the structures at the specified locations.
The result was a complete and verified tie-down system rather than simply a collection of installed anchors.
Compliance with Structural Loading Requirements
The tie-down arrangement was engineered in accordance with the relevant requirements of AS/NZS 1170, the structural design actions standard used to determine loads including wind actions on buildings and structures.
The anchor positions, capacities and connection points were selected to provide the required restraint for the demountable classrooms.
By combining engineered anchor placement with individual proof testing, the completed system provided William Clarke College with confidence that the buildings had been securely restrained.
Why HULK Earth Anchors Were Selected
HULK Earth Anchors were well suited to this project because they offered:
- Fast installation
- Immediate availability of holding capacity
- Individual proof testing
- No excavation
- No soil disturbance to the school property
- Compact installation equipment
- Direct connection to the building structure
- No concrete curing time
- Reliable performance under tensile loading
Compared with large concrete ballast systems, the percussion-driven anchors required significantly less material handling and occupied very little space around the completed buildings.
The system was also able to be installed beneath and immediately adjacent to the classrooms, allowing the tie-down loads to be transferred efficiently into the ground.
Applications Beyond the School Environment
The same anchoring approach can be used for a wide range of portable, modular and demountable structures, including:
- Modular Classrooms
- Construction site offices
- Mining accommodation and facilities
- Portable workshops
- Storage buildings
- Emergency and humanitarian shelters
- Remote-site buildings
- Cyclone-rated modular structures
- Temporary medical and community facilities
The required anchor type, capacity and layout can be adapted to suit the structure, site conditions and applicable design loads.
Project Outcome
The 12 demountable classrooms at William Clarke College were successfully secured using 48 proof-tested HULK Earth Anchors.
The complete installation was delivered in one morning, demonstrating the efficiency of percussion-driven anchors for projects operating under tight construction schedules.
Each anchor was installed, tested, tensioned and connected to the underside of the classrooms at the engineered tie-down locations.
The completed system provided a practical and verified alternative to more disruptive anchoring methods, while minimising excavation and disturbance to the school grounds.
The project highlighted the ability of Anchoring Rope and Rigging to deliver a complete building tie-down solution incorporating installation, testing, tensioning and final connection—not simply the supply of anchoring components.
With the new classrooms securely restrained, William Clarke College gained additional teaching space supported by a professionally installed and tested HULK Earth Anchoring system.