Enquire now
Kwik-Trench Mini-Trencher hero image
Fast, Clean Trenching

Kwik-Trench Mini-Trencher

The Little Beaver Kwik-Trench is a compact, walk-behind mini-trencher designed for shallow trenching across lawns, landscaped areas, golf courses and restricted-access worksites.

Little Beaver Kwik-Trench Mini-Trencher

Its simple push-forward operation, narrow cutting wheel and compact footprint allow contractors, landscapers, irrigation installers, golf-course maintenance teams and equipment-rental businesses to complete trenching work without bringing tracked or skid-steer equipment onto the site.

Depending on the model and cutting arrangement, the Kwik-Trench can cut at speeds of up to approximately 9.1 metres per minute, producing trenches from approximately 2.5 to 10.2 centimetres wide and up to 30.5 centimetres deep.

Compact Equipment for Narrow, Shallow Trenches

The Kwik-Trench uses a high-speed, belt-driven cutting wheel fitted with carbide-tipped teeth to cut through soil, turf and smaller roots.

Unlike conventional chain trenchers, the cutting wheel deposits excavated soil neatly along one side of the trench. This assists with backfilling and reduces the time required for site cleanup.

A locking swivel wheel helps the operator maintain a straight cutting line, while the depth-control crank allows the trench depth to be adjusted for the service or application being installed.

Its compact dimensions also allow the machine to work in locations that may be inaccessible to full-size trenchers, skid-steer loaders and other larger equipment.

Little Beaver Kwik-Trench Mini-Trencher image

Typical Applications

Irrigation and Lawn Sprinkler Systems

Irrigation and Lawn Sprinkler Systems

Cut narrow trenches for irrigation pipework, sprinkler cables and associated services across established lawns and landscaped areas.

Low-Voltage Wiring

Low-Voltage Wiring

Install cable for a wide range of low voltage cabling for Landscape lighting, Communications, Electronic pet fencing and Other low-voltage applications

Plumbing and Drainage

Plumbing and Drainage

Prepare shallow trenches for small-diameter water, drainage and condensate lines where the required depth remains within the machine’s capacity.

Landscape Edging

Landscape Edging

Create a controlled trench for installing steel, plastic, timber or masonry landscape edging.

Silt Fencing

Silt Fencing

Cut narrow installation trenches for the lower edge of sediment-control and silt-fence fabric.

Why Choose a Little Beaver Kwik-Trench?

Fast Cutting Performance

The cutting wheel rotates at up to 800 rpm, allowing the Kwik-Trench to cut clean trenches at speeds of up to approximately 9.1 metres per minute, subject to soil conditions, trench depth and the selected cutting arrangement.

Clean, Narrow Trenches

Interchangeable cutting-tooth arrangements allow trench widths from approximately 2.5 to 10.2 centimetres, depending on the model.

This makes the Kwik-Trench suitable for installing irrigation, cable, edging and other services that do not require a wide excavation.

Reduced Backfilling and Cleanup

The machine is designed to place excavated material along one side of the trench rather than spreading spoil across the work area.

The neatly deposited soil can then be returned to the trench after installation of the service or material.

Suitable for Established Turf

Pneumatic tyres distribute the machine’s weight across the surface and reduce turf damage compared with tracked machines and skid-steer-mounted trenchers.

This is particularly useful on residential lawns, parks, sports grounds and golf courses.

Compact and Manoeuvrable

The walk-behind configuration allows the machine to pass through gates and work beside buildings, fences, garden beds and other obstacles.

Simple Depth Adjustment

A manual depth-control crank allows the operator to adjust trenching depth to suit the application.

Durable Cutting Components

Heat-treated, hardened-steel cutting teeth are carbide tipped to improve cutting performance and service life.

Key Features

Push-Forward Operation

Push-Forward Operation

The operator guides the Kwik-Trench forward along the required route.

This differs from many conventional trenchers that require the operator to pull the machine backwards while cutting.

High-Speed Cutting Wheel

High-Speed Cutting Wheel

The cutter wheel rotates at up to 800 rpm and is driven through a triple V-belt arrangement.

High cutting speed helps produce a neat trench while efficiently clearing material from the cutting path.

Slip Clutch Protection

Slip Clutch Protection

A slip clutch is incorporated into the cutter-wheel hub.

If the teeth encounter a significant obstruction, the clutch can slip to help protect the engine and drivetrain from excessive shock or damage.

Carbide-Tipped Cutting Teeth

Carbide-Tipped Cutting Teeth

Heat-treated steel teeth are fitted with carbide tips for increased wear resistance and cutting performance.

Different tooth styles and mounting arrangements are used to create the required trench width.

Adjustable Cutting Depth

Adjustable Cutting Depth

A manual crank allows the operator to adjust cutting depth up to a maximum depth of approximately 30cm (model dependant).

Locking Swivel Wheel

Locking Swivel Wheel

The front swivel wheel assists with manoeuvring the machine into position.

It can then be locked to help maintain a straight trenching line.

Protective Cutting-Wheel Shroud

Protective Cutting-Wheel Shroud

A protective shroud encloses the rotating cutting components, while a side shield helps contain material thrown from the cutting area.

Pneumatic Tyres

Pneumatic Tyres

Pneumatic tyres allow the machine to move across turf and landscaped surfaces without the concentrated loading associated with tracks.

Kwik-Trench Models

The range includes two petrol-powered models.

KT200B

The KT200B is the smaller and lighter machine in the range.

It is suited to narrow trenching applications where compact dimensions, manoeuvrability and ease of transport are priorities.

The KT200B can cut trenches from approximately 2.5 to 7.6 centimetres wide and up to approximately 20.3 centimetres deep.

KT2400B

The KT2400B provides a larger engine, greater cutting depth and a wider trenching capability.

It can cut trenches from approximately 2.5 to 10.2 centimetres wide and up to approximately 30.5 centimetres deep.

The model also uses an automatic V-belt tensioner to support consistent belt operation.

Cutting Widths and Teeth

The Kwik-Trench can be configured to cut different trench widths by changing the cutting teeth and their mounting positions.

Available trench widths depend on the selected machine:

KT200B

The KT200B cuts trenches approximately:

  • 2.5 cm wide
  • 5.1 cm wide
  • 7.6 cm wide

KT2400B

The larger KT2400B can cut trenches approximately:

  • 2.5 cm wide
  • 5.1 cm wide
  • 7.6 cm wide
  • 10.2 cm wide

The appropriate tooth arrangement should be selected according to:

  • Required trench width
  • Required depth
  • Soil conditions
  • Presence of turf or smaller roots
  • Service or material being installed
  • Desired production rate

Kwik-Trench Specifications

Specification KT200B KT2400B
Engine Brand / Model Honda GX160 OHV Honda GX240 OHV
Engine Power 3.6 kW net 5.9 kW net
Oil Alert System Standard Standard
Starting Recoil Recoil
Blade Drive Triple V-belt Triple V-belt with automatic tensioner
Trench Width 2.5–7.6 cm 2.5–10.2 cm
Maximum Trench Depth 20.3 cm 30.5 cm
Depth Gauge Standard Standard
Number of Cutting Teeth KTSXRT: 4
KTSBP: 8
KTSXRT: 8
KTSBP: 16
Cutting-Tooth Type Carbide tipped Carbide tipped
Dimensions, L × W × H 145.4 × 78.7 × 101.6 cm 182.9 × 91.4 × 101.6 cm
Dry Shipping Weight Approximately 127 kg Approximately 195 kg

Note

Specifications and available configurations may change. Confirm the required model, cutting width and tooth configuration with AR+R before ordering.

Choosing Between the KT200B and KT2400B

Choose the KT200B for:

  • Smaller residential and landscape projects
  • Irrigation and low-voltage cable installations
  • Narrow trenches up to approximately 7.6 cm wide
  • Maximum trench depths of approximately 20.3 cm
  • Easier transport and manoeuvring
  • Rental fleets requiring a compact general-purpose mini-trencher

Choose the KT2400B for:

  • Deeper trenching up to approximately 30.5 cm
  • Trench widths up to approximately 10.2 cm
  • Drainage and larger service installations
  • Higher-output commercial work
  • Applications requiring the larger Honda GX240 engine
  • More demanding or sustained trenching tasks

Designed for Efficient Backfilling

The Kwik-Trench cutter-wheel and shroud arrangement directs spoil to one side of the trench.

This provides several practical benefits:

  • The trench remains visible and accessible
  • Excavated soil is kept close to the trench
  • Less material is spread across the surrounding surface
  • Backfilling can be completed more quickly
  • Cleanup requirements are reduced
  • Damage to established turf and landscaping is minimised

This can be particularly valuable where appearance and site reinstatement are important, such as residential lawns, commercial landscapes, parks and golf courses.

Mini-Trencher or Full-Size Trencher?

A Kwik-Trench Mini-Trencher is generally suited to shallow, narrow trenching where access, turf protection and site reinstatement are important.

Consider the Kwik-Trench for:

  • Irrigation lines
  • Low-voltage cables
  • Electronic pet fencing
  • Landscape lighting
  • Edging
  • Silt fencing
  • Root pruning
  • Narrow drainage lines
  • Restricted-access work
  • Established lawns and landscaped areas

Little Beaver Kwik-Trench Equipment from AR+R

AR+R supplies Little Beaver Kwik-Trench Mini-Trenchers, cutting teeth and supported replacement components for Australian contractors, landscapers, rental businesses and equipment users.

We can assist with:

  • KT200B and KT2400B model selection
  • Cutting-width requirements
  • Cutting teeth and wear components
  • Application suitability
  • Transport options
  • Product information
  • Replacement parts
  • Commercial quotations
Choosing Between the KT200B and KT2400B image
FAQ

Frequently Asked Questions

How deep can the Kwik-Trench cut?

The KT200B cuts to a maximum depth of approximately 20.3 cm. The KT2400B cuts to a maximum depth of approximately 30.5 cm.

What trench widths are available?

The KT200B can produce trenches approximately 2.5–7.6 cm wide. The KT2400B can produce trenches approximately 2.5–10.2 cm wide.

How fast can it trench?

The Kwik-Trench can cut at speeds of up to approximately 9.1 metres per minute. Actual output depends on soil conditions, depth and cutting configuration.

Can it be used on established lawns?

Yes. The compact machine and pneumatic tyres are designed to reduce damage to turf compared with tracked or skid-steer equipment.

Can it cut through roots?

The Kwik-Trench is promoted for controlled root-pruning applications. Suitability will depend on root diameter, species, site conditions and the required arboricultural outcome.

Where does the excavated soil go?

Where does the excavated soil go?

Does AR+R supply replacement cutting teeth?

AR+R can assist with compatible cutting teeth, wear components and supported replacement parts for Little Beaver Kwik-Trench machines.

Request a Kwik-Trench Quote image

Request a Kwik-Trench Quote

Tell AR+R about your trenching application and we will help identify the appropriate Little Beaver Kwik-Trench model, cutting width and tooth configuration.

Call: 1300 692 626
International: +61 2 4372 1422

Request a Quote