Enquire now

Clevis & Threaded Bar Anchor Systems

Anchoring Rope and Rigging supplies HULK Earth Anchor assemblies incorporating clevis connections with CTB and ATB threaded bar tendons for civil, geotechnical, structural restraint, tie down and guying applications.

The clevis provides the connection between the HULK Earth Anchor and the threaded tendon, while the bar transfers load to the required termination above ground or at the structure being restrained.

Depending on the application, the system can incorporate couplers, nuts, washers, dome washers, load plates, eye nuts, thimble eye nuts and other connection hardware.

A range of standard HULK Earth Anchor threaded bar assemblies is available for common applications, while custom assemblies can be configured to suit specific installation depths, loads, terminations and project requirements.

Complete Anchor-to-Structure Connections

Threaded bar systems provide a rigid and direct connection between the buried HULK Earth Anchor and the final load transfer point.

A typical assembly may incorporate:

  • HULK Earth Anchor with clevis
  • CTB or ATB threaded bar
  • Threaded bar couplers
  • Load plates
  • Flat washers
  • Dome washers
  • Nuts
  • Eye nuts
  • Thimble eye nuts
  • Project specific brackets or structural connections

The final configuration depends on the anchor selected, required load, installation depth, connection geometry and application.

Anchoring Rope and Rigging can supply individual components or assist with configuring the complete anchor tendon and termination system.

Clevis & Threaded Bar Anchor Systems image

CTB & ATB Threaded Bar Tendons

CTB and ATB threaded bar can form the primary tendon between the buried HULK Earth Anchor and the structure, load plate or connection point being restrained, providing a robust mechanical connection through the full anchor assembly.

Unlike wire rope, threaded bar provides a rigid tendon and a direct load path between the anchor and the final termination. This makes it particularly suitable where positive structural connection, controlled positioning or a permanent tendon arrangement is required, including retaining, structural restraint, guying and other civil or geotechnical applications.

Different bar sizes and systems can be matched to the HULK Earth Anchor range and the specific project requirements. Selection will typically consider the required load, installation depth, connection geometry, environmental exposure and intended design life.

Where greater installation depths are required, compatible couplers allow the tendon to be extended using additional bar lengths. This provides a practical way to build up longer assemblies during installation without the need to handle a single long bar, while maintaining a continuous mechanical load path from the anchor through to the final connection point.

Selecting a Threaded Bar Tendon

Key considerations include:

  • Required anchor capacity
  • Application specific loading requirements
  • Required installation depth
  • Direction and geometry of the load
  • Required tendon length
  • Type of structural termination
  • Environmental exposure
  • Corrosion protection requirements
  • Required service or design life
  • Accessibility for inspection or future adjustment

Threaded bar systems are particularly useful where the application requires a rigid tendon, positive mechanical termination or improved durability compared with some flexible connection systems.

CTB & ATB Threaded Bar Tendons image

Benefits of a Bar System

CTB threaded bar provides a rigid, modular tendon system for HULK Earth Anchors, allowing the buried anchor to connect directly to structural, retaining or above ground restraint systems.

The bar size, length, couplers and termination hardware can be configured to suit the required load, installation depth, connection geometry and intended design life.

Flexible Installation Depth

CTB bar can be extended using compatible couplers, allowing additional bar lengths to be added as installation depth increases.

This makes the system well suited to deeper anchor installations without requiring a single long tendon to be handled or transported.

Improved Design Life

CTB systems can be configured with corrosion protection suited to longer term and permanent anchoring applications.

The anchor, threaded bar, couplers and termination hardware are selected together so the design life of the complete assembly can be considered rather than the tendon in isolation.

Direct Structural Connection

Threaded bar provides a rigid mechanical load path between the HULK Earth Anchor and the final connection point.

Load plates, nuts, dome washers, eye nuts and specialist fittings can be used to transfer the anchor load directly into retaining structures, brackets, guying systems or other structural connections.

Structural Termination Options

The exposed end of a threaded bar tendon can be terminated in different ways depending on how the anchor load needs to be transferred into the structure or restraint system.

Load Plates

Load Plates

Load plates are commonly used where the tensile force from the earth anchor needs to be distributed over a larger bearing area.

Typical applications include retaining structures, slope stabilisation, wall restraint and other civil or geotechnical applications where the tendon passes through or connects to a structural face.

The plate size, thickness and configuration are selected to suit the required load and supporting structure.

Couplers, Nuts, Washers & Dome Washers

Couplers, Nuts, Washers & Dome Washers

Nuts, washers and couplers provide the mechanical connections required to secure and extend the threaded tendon within the anchor assembly.

Couplers allow additional CTB or ATB bar lengths to be joined where greater installation depth is required, while dome washers can accommodate angular differences between the tendon and bearing surface.

The final arrangement is selected to suit the tendon system, installation depth, loading direction and structural connection.

Eye Nuts & Thimble Eye Nuts

Eye Nuts & Thimble Eye Nuts

Eye nuts and thimble eye nuts provide a defined connection point at the exposed end of the threaded bar, making them suitable for guying, tie down and structural restraint applications.

They allow the rigid CTB or ATB tendon below ground to transition into wire rope or other rigging hardware above ground, where flexibility, adjustment or a different connection arrangement is required.

Specialist Connections

Specialist Connections

Specialist connection hardware can be incorporated where a standard eye, plate or structural termination is not suitable for the application.

This includes purpose designed solutions such as the HULK Twist Lock Bracket for securing shipping containers, dome shelters and similar structures, as well as other fabricated brackets or connection components developed around the required load path and attachment geometry.

Galvanised or DCP Coated Threaded Bar?

The required corrosion protection depends on the application, environmental exposure and intended design life of the anchoring system.

The threaded bar, couplers, anchor and termination hardware should be considered together when selecting the complete assembly.

Galvanised Threaded Bar

Galvanised CTB or ATB provides a durable, corrosion resistant tendon suitable for a wide range of earth anchoring, structural restraint and geotechnical applications.

Depending on the project requirements, corrosion protection may be provided using hot dip galvanising, thermal diffusion galvanising or other suitable treatments.

The appropriate protection system is selected according to the required design life, environmental exposure and the specification of the complete anchor assembly.

DCP Coated Threaded Bar

DCP coated threaded bar provides enhanced corrosion protection for applications requiring increased durability or longer design life.

It can be incorporated into HULK Earth Anchor assemblies where project conditions demand a higher level of corrosion protection, with the complete anchor, tendon and termination system selected accordingly.

Design Life Considerations

The design life of a HULK Earth Anchor assembly depends on more than the tendon alone.

The anchor body, clevis, threaded bar, couplers, termination hardware and corrosion protection system all contribute to the performance of the complete assembly.

Factors that may influence system selection include:

  • Required design life
  • Soil and groundwater conditions
  • Atmospheric exposure
  • Corrosive or marine environments
  • Tendon material and protection system
  • Anchor material and coating
  • Exposed connection hardware
  • Accessibility for inspection or maintenance

Threaded bar systems can provide an appropriate solution where longer term or permanent anchoring requirements need to be considered.

Anchoring Rope and Rigging can assist with selecting the anchor, tendon and termination arrangement to suit the intended application and service conditions.

Design Life Considerations image

Typical Applications for CTB and ATB Bar

Retaining & Geotechnical Structures

Retaining & Geotechnical Structures

Threaded bar tendons can transfer anchor loads through load plates into retaining structures, reinforced soil systems and other geotechnical works.

The rigid tendon and mechanical termination provide a straightforward means of transferring tensile load from the buried HULK Earth Anchor to the structural face.

Guying & Structural Restraint

Guying & Structural Restraint

Eye nuts and thimble eye nuts allow threaded bar systems to terminate at a defined connection point for guying, tie down or structural restraint applications.

Where required, the connection can continue above ground using wire rope, shackles, turnbuckles or other rigging hardware.

Deep Anchor Installations

Deep Anchor Installations

Where ground conditions or required capacity result in greater installation depths, threaded bar couplers allow the tendon to be extended progressively to suit the installed anchor depth.

Civil & Infrastructure Applications

Civil & Infrastructure Applications

CTB and ATB systems can be configured for civil and infrastructure projects requiring rigid tendons, structural load transfer and purpose designed termination arrangements.

Selecting the Right Clevis & Threaded Bar System

The appropriate threaded bar assembly should be selected as a complete system rather than as a collection of individual components.

Key considerations include:

  • HULK Earth Anchor selection
  • Required load
  • Installation depth
  • CTB or ATB tendon selection
  • Coupler requirements
  • Structural connection geometry
  • Required termination
  • Environmental exposure
  • Required design life

Anchoring Rope and Rigging can configure the anchor, clevis, tendon and termination hardware to suit the specific project requirements.

FAQ

Frequently Asked Questions

Can CTB and ATB threaded bar be used with different HULK Earth Anchors?

Yes. Threaded bar systems can be configured to suit different HULK Earth Anchor sizes and applications. The appropriate bar size and assembly are selected according to the anchor, required load and project requirements.

Why use a clevis between the anchor and threaded bar?

The clevis provides the mechanical connection between the HULK Earth Anchor and the threaded tendon while allowing the components to align with the intended load path.

Can the threaded bar be extended for deeper anchors?

Yes. Compatible couplers can be used to join additional bar lengths where greater tendon length is required.

Can the system terminate with a load plate?

Yes. Load plates, washers and nuts can be incorporated where the anchor force needs to be transferred into a retaining structure, wall or other structural element.

What is a dome washer and plate used for?

A dome washer can accommodate angular differences between the threaded tendon and the bearing surface, allowing the nut and washer arrangement to seat more appropriately where the tendon is not perpendicular to the structure.

Can threaded bar connect to wire rope above ground?

Yes. Eye nuts or thimble eye nuts can provide a connection between the rigid threaded bar tendon and wire rope or other rigging hardware above ground.

Why choose threaded bar instead of wire rope?

Threaded bar may be preferred where the application requires a rigid tendon, direct structural load transfer, load plate termination, deeper installations using couplers or a system configured for increased design life.

Can Anchoring Rope and Rigging supply complete assemblies?

Yes. Standard assemblies are available for common HULK Earth Anchor configurations, while custom systems can be supplied with the required bar lengths, couplers, terminations and connection hardware.

Discuss Your HULK Earth Anchor Requirements image

Discuss Your HULK Earth Anchor Requirements

Contact AR+R for assistance with product supply, anchor assemblies, installation equipment, contract installation, proof testing, supervision or training.

Call: 1300 692 626
International: +61 2 4372 1422

Discuss Your Project