Enquire now
HULK Earth Anchors hero image
Australian-Made Ground Anchoring Systems

HULK Earth Anchors

Australian-designed and manufactured percussion-driven earth anchors, supported by AR+R from early project guidance and product supply through to installation, proof testing and documentation.
Discuss Your Project View Anchor Range

Ground Anchoring Products Backed by Practical Project Capability

HULK Earth Anchors are a range of percussion-driven ground anchors developed and manufactured in Australia by Anchoring Rope and Rigging Pty Ltd.

The system provides a rapid and labour-saving means of creating a reliable point of restraint below ground. HULK Earth Anchors can be used across civil, structural, utility, marine, agricultural, landscape and asset-protection projects where tensile restraint is required.

AR+R does more than supply an anchor product. Our capability can extend from early design guidance and assembly development through to manufacture, installation, proof testing, supervision, training and project documentation.

This combination of manufacturing knowledge and field experience allows proposed solutions to be considered in terms of both technical requirements and practical buildability.

What Is a HULK Earth Anchor?

A HULK Earth Anchor is a geotechnical anchor designed to resist tensile loads.

The system is more specifically described as a percussion-driven tipping-plate anchor. The anchor head is driven into the ground with a reusable HULK Smasher Rod or drive steel, leaving the attached tendon extending to the surface.

After the required depth has been reached, the installation equipment is removed and a controlled tensile load is applied to the tendon. This rotates the anchor head from its driven orientation into its load-resisting position within the ground.

The anchor can then be proof tested to a nominated load, allowing its installed response to be checked in the actual site conditions. Following successful activation and testing, the anchor is available for connection and use without waiting for concrete or grout to cure.

Ground Anchoring Products Backed by Practical Project Capability image

Hulk HG180 with Clevis for CTB Bar and Hulk H110 with Wire Rope and Thimble Eye

The HULK Earth Anchor Installation Concept

1. Drive

The HULK Earth Anchor is driven to the required depth using a reusable Smasher Rod or drive steel.

2. Withdraw

The reusable installation equipment is removed, leaving the anchor head and tendon below ground.

3. Activate and Test

A controlled load is applied through the tendon, rotating the anchor head into its locked position and allowing the installation to be proof tested.

See HULK Earth Anchor Supply, Installation & Testing

Installation sequence of a Hulk Earth Anchor showing the anchor being driven into the ground, removal of the drive steel, and activation and load testing of the anchor

The HULK Advantage

Fast, Labour-Saving Installation

HULK Earth Anchors are driven directly into the ground using equipment selected to suit the anchor size, installation depth and project conditions.

Reduced Excavation

The anchor head does not require an excavated footing or a large volume of displaced ground.

Reduced Reliance on Concrete and Grout

No concrete or grout is required to set the anchor head in its load-resisting position.

Minimal Ground Disturbance

Driven installation can reduce spoil, surface disruption and disturbance to the ground surrounding the anchor.

Immediately Verifiable Performance

The anchor can be proof tested during installation to assess its response in the actual ground conditions.

A Range for Different Anchoring Requirements

The HULK Earth Anchor range is organised into three anchor families.

HULK HP Range

Compact anchors for smaller and specialised anchoring requirements.

The HP range of earth anchors includes:

  • HULK HP25
  • HULK HP35

HULK H Range

A versatile range of galvanised ductile-iron anchors with increasing soil-bearing surface areas.

The H range of earth anchors includes:

  • HULK H50
  • HULK H80
  • HULK H110

HULK HG Range

Heavy-duty galvanised ductile-iron anchors for larger civil, structural and geotechnical anchoring requirements.

The HG range of earth anchors includes:

  • HULK HG100
  • HULK HG180
  • HULK HG320

Note

The appropriate anchor is not selected from the anchor-body strength or model size alone. Ground conditions, required loads, installation depth, tendon configuration, structural connection, design life and testing requirements must also be considered.

Compare the HULK Earth Anchor Range

More Than an Anchor Head

A complete HULK Earth Anchor system may include:

  • Anchor head
  • Wire-rope, chain, rod or threadbar tendon
  • Corrosion-protection requirements
  • Tendon termination
  • Couplers and connection hardware
  • Nuts, washers and bearing plates
  • Structural connection
  • Installation equipment
  • Anchor-activation and proof-testing equipment

AR+R can supply standard assemblies or assist in developing a project-specific configuration around the required load, ground conditions, installation depth, design life, corrosion exposure and connection to the supported structure.

HULK Earth Anchor Supply, Installation & Testing

A HULK HG180 Earth Anchor Head with Clevis for CTB Bar

HULK HG180 Earth Anchors Head with Clevis for CTB Bar

Hulk Earth Anchor Applications

HULK Earth Anchors can be considered across a wide range of permanent and temporary anchoring applications.

Civil Engineering and Construction

Civil Engineering and Construction

Retaining walls, temporary works, guyed structures, gabion support, structural restraint and foundation-related applications.

Slope Stabilisation and Erosion Control

Slope Stabilisation and Erosion Control

Anchoring of surface-reinforcement systems, erosion-control measures, rock-retention systems and unstable embankments.

Cyclone Tie-Down and Asset Protection

Cyclone Tie-Down and Asset Protection

Restraint of portable buildings, demountable structures, containers, site facilities, equipment and other exposed assets.

Pipeline and Buoyancy Control

Pipeline and Buoyancy Control

Anchoring systems developed to resist pipeline flotation and provide restraint for submerged or buoyant infrastructure.

Energy and Utilities

Energy and Utilities

Anchoring for power lines, telecommunications poles, masts, towers, wind-energy infrastructure and other utility assets.

Marine Applications

Marine Applications

Anchoring and restraint for pontoons, marine structures, floating infrastructure, buoys, moorings and related applications.

Landscape and Tree Anchoring

Landscape and Tree Anchoring

Underground tree anchoring, tree-guying systems and restraint for landscape structures.

Agriculture

Agriculture

Trellised crops, vineyards, orchards, crop-protection structures, shade systems and other agricultural infrastructure.

Designed and Manufactured in Australia

HULK Earth Anchors are designed, developed and manufactured in Australia by Anchoring Rope and Rigging Pty Ltd.

The range is backed by more than 27 years of experience in the manufacture, development and installation of percussion-driven tipping-plate anchor systems. Clients have direct access to the manufacturer together with personnel experienced in anchor installation and field testing.

Supported from Product Supply to Installed Verification

Depending on the project, AR+R can assist with:

Design Guidance

Early review of the application, required loads, ground information, installation constraints and proposed anchoring arrangement.

Manufacture and Supply

Australian manufacture and supply of anchor heads, tendons, terminations, connection components and project-specific assemblies.

Ground Anchor Installation

Installation using equipment suited to the anchor model, required depth, access conditions and project environment.

Proof Testing and Load Testing

Activation and testing of installed anchors to the nominated project requirements.

Supervision and Training

Support for contractors, installers and distributors undertaking HULK Earth Anchor installation.

Installation Documentation

Installation and test records appropriate to the agreed project scope.

Explore Supply, Installation & Testing

Discuss Your Anchoring Project

Every project involves a different combination of loads, ground conditions, access, connection requirements and design-life considerations.

To assist AR+R in reviewing your application, provide as much of the following information as possible:

  • Intended application
  • Project location
  • Required design, working or test load
  • Ground or geotechnical information
  • Proposed installation depth
  • Installation angle
  • Access or equipment restrictions
  • Required design life
  • Required supply, installation or testing scope

Fields marked * are required.

Please check the highlighted fields and try again.

FAQ

Frequently Asked Questions

Do HULK Earth Anchors require concrete?

No concrete or grout is required to set the anchor head in the ground. Separate structural works or surface connections may still form part of the complete project.

Can HULK Earth Anchors be proof tested?

Yes. A controlled tensile load can be applied to activate the anchor and test its installed response against a nominated project requirement.

Can AR+R supply anchors without installing them?

Yes. AR+R can provide product supply, complete assemblies, installation equipment or a broader installation and testing scope.

How is the correct HULK Earth Anchor selected?

Selection depends on the required load, ground conditions, installation depth and angle, tendon configuration, structural connection, access, design life and testing requirements.