Enquire now
Big Beaver Auger Drill Rig hero image
Portable Hydraulic Drilling for Deep and Restricted-Access Work

Big Beaver Auger Drill Rig

The Little Beaver Big Beaver combines the drilling power and lifting capacity of a larger hydraulic rig with a compact format that can be manoeuvred into locations inaccessible to many truck-mounted or skid-steer drilling systems.

Big Beaver Auger Drill Rig

Designed for environmental test wells, soil sampling, foundation repair and other demanding auger-drilling applications, the Big Beaver can be moved and operated by one person on suitable level ground.

Its narrow 66 cm width allows it to pass through many gates and doorways, while the adjustable mast, swing-away drive head and hydraulic auger-lifting system support efficient drilling, extension handling and auger removal in confined work areas.

Truck-Mounted Capability in a Portable Drill Rig

The Big Beaver is the most powerful earth drill in the Little Beaver range.

A hydraulic drive head provides the torque required for deep drilling, large-diameter augers and demanding ground conditions. The drill rig also incorporates a mechanical mast and hydraulic lifting system capable of raising approximately 1,134 kg.

The standard Big Beaver can operate D-Series augers from approximately 10.2 cm to 45.7 cm in diameter. Depending on auger diameter and soil conditions, extensions can be added to drill:

  • Approximately 30.5 metres deep with a 15.2 cm auger
  • Approximately 9.1 metres deep with a 40.6 cm auger

Actual achievable depth depends on soil conditions, auger configuration, cuttings removal and the requirements of the drilling application.

Big Beaver Auger Drill Rig image

Typical Applications

Soil Sampling

Soil Sampling

Use solid-stem or hollow-stem auger arrangements for geotechnical, environmental and agricultural soil investigation.

The swing-away drive head provides access above the auger string for sampling tools and related equipment.

Foundation Repair

Foundation Repair

Drill pier holes close to existing buildings and foundations.

The mast can be adjusted up to 15 degrees from vertical, helping the rig work close to walls, footings and other structural obstructions.

Geotechnical Investigation

Geotechnical Investigation

Complete exploratory holes and retrieve samples in areas with narrow access, limited headroom or sensitive finished surfaces.

Groundwater Monitoring

Groundwater Monitoring

Support shallow environmental and groundwater-monitoring installations using appropriate augers, casing and sampling equipment.

Why Choose a Little Beaver Big Beaver?

Restricted-Access Drilling

At approximately 66 cm wide, the Big Beaver can pass through gates and many standard doorways.

Its compact dimensions allow drilling near buildings, beneath eaves and in interior or enclosed locations that cannot be reached by many vehicle-mounted rigs.

Deep Auger Drilling

Auger extensions can be added progressively as drilling advances.

Under suitable conditions, the Big Beaver can drill approximately 15.2 cm diameter holes to depths of up to 30.5 metres.

Large-Diameter Capability

The drill rig can turn D-Series augers up to approximately 45.7 cm in diameter.

This makes it suitable for foundation-repair piers, larger soil-sampling holes and other applications requiring more capacity than a handheld earth drill.

Hydraulic Auger Lifting

The rig provides approximately 1,134 kg of raising capacity, assisting with the retrieval of augers and extensions from deep holes.

Adjustable Drilling Angle

The mast can be positioned from vertical to approximately 15 degrees off vertical.

This allows holes to be drilled close to foundations and structures where a conventional vertical drilling position may not provide the required alignment.

One-Person Portability

Pneumatic wheels allow one person to move the rig across suitable level ground.

This provides a practical balance between portability and drilling capability for sites where larger equipment would be difficult or costly to mobilise.

Key Features

Narrow Drill-Rig Frame

Narrow Drill-Rig Frame

The standard Big Beaver measures approximately 121.9 cm long, 66 cm wide, 203.2 cm high

The narrow width is one of the rig’s main advantages for restricted-access drilling.

Swing-Away Drive Head

Swing-Away Drive Head

The hydraulic drive head can be moved away from the centreline of the bore. This makes it easier to, add or remove auger extensions, access hollow-stem augers, introduce sampling tools, work above the open auger string, retrieve samples without dismantling the complete rig.

Hydraulic Power Source

Hydraulic Power Source

The Big Beaver Drill Rig uses a dedicated hydraulic power source to deliver reliable drilling performance, providing the torque and control required for demanding augering, sampling and ground investigation work.

Adjustable Mast Angle

Adjustable Mast Angle

The Big Beaver mast can be positioned up to 15° from vertical, allowing the rig to drill close to foundations, walls and other structures where vertical access may be restricted.

This added positioning flexibility makes the rig particularly useful for foundation repair, geotechnical work and restricted-access drilling.

Hydraulic Control Valves

Hydraulic Control Valves

The drill rig incorporates separate hydraulic control valves for drive-head rotation and mast travel.

Stable Drilling Platform

Stable Drilling Platform

The welded steel frame and wide wheelbase provide a stable platform for controlled auger drilling and retrieval. Combined with the torque tube, this helps transfer drilling reaction into the rig structure and improves control when operating larger augers or working at depth.

Augers and Extensions

The Big Beaver is designed for use with Little Beaver D-Series augers ranging from approximately 10.2 cm to 45.7 cm in diameter.

Auger extensions can be added as greater drilling depth is required.

Available drilling arrangements may include:

  • Standard soil augers
  • Heavy-duty augers
  • Solid-stem augers
  • Hollow-stem augers
  • Carbide cutting points and blades
  • Rock-cutting components
  • Auger extensions
  • Soil-sampling tools
  • Well-installation accessories

The appropriate configuration should be selected according to:

  • Required hole diameter
  • Required drilling depth
  • Soil and rock conditions
  • Sampling requirements
  • Need for hollow-stem access
  • Available working height
  • Cuttings-removal requirements
  • Required mast angle
  • Site-access constraints

Big Beaver Models

The range includes the standard Big Beaver and the taller Big Beaver XL.

Big Beaver

The standard Big Beaver has a drive-head travel of approximately 152.4 cm.

Its lower overall height makes it the more compact option for work beneath eaves, within buildings and in locations where headroom is limited.

Big Beaver XL

The Big Beaver XL increases drive-head travel to approximately 182.9 cm.

Its taller mast can provide more working travel for drilling, extension handling and selected sampling arrangements.

The drilling speed, torque, lifting capacity, maximum auger diameter and mast adjustment are otherwise published as the same for both models.

Big Beaver Drill Rig Specifications

Specification Big Beaver Big Beaver XL
Frame Welded mechanical steel tubing Welded mechanical steel tubing
Mast 38 mm diameter drive screw and structural steel angle 38 mm diameter drive screw and structural steel angle
Drilling Angle Continuously adjustable from vertical to 15° Continuously adjustable from vertical to 15°
Stabilisation Torque tube Torque tube
Standard Auger Speed 150 rpm 150 rpm
Optional High-Torque Auger Speed 100 rpm 100 rpm
Standard Drilling Torque Approximately 705 Nm Approximately 705 Nm
Optional High-Torque Drilling Torque Approximately 1,491 Nm Approximately 1,491 Nm
Raising Capacity Approximately 1,134 kg Approximately 1,134 kg
Hydraulic Control Valves 2 2
Drive-Head Travel 152.4 cm 182.9 cm
Maximum Auger Diameter 45.7 cm 45.7 cm
Dimensions, L × W × H 121.9 × 66 × 203.2 cm 121.9 × 66 × 233.7 cm
Shipping Weight Approximately 306 kg Approximately 331 kg

Note

Specifications and available configurations may change. Confirm the required rig, hydraulic power source, drive-head option, auger and sampling arrangement with AR+R before ordering.

Standard or High-Torque Drive?

Standard Drive

The standard hydraulic drive operates at approximately:

  • 150 rpm
  • 705 Nm torque

This configuration provides the higher auger speed and may be suitable for normal soil drilling and applications where production rate is the priority.

Optional High-Torque Drive

The optional high-torque drive operates at approximately:

  • 100 rpm
  • 1,491 Nm torque

The lower-speed, higher-torque configuration may be preferable for:

  • Large-diameter augers
  • Dense or difficult soils
  • Foundation-repair drilling
  • Deep auger strings
  • Applications requiring greater rotational force

The correct drive configuration depends on the expected ground conditions, auger diameter and drilling application.

Hydraulic Power Source

The Big Beaver is hydraulically powered by a separate Little Beaver Hydraulic Power Source.

The power unit also provides the attachment point for the rig’s torque tube and is designed for dependable operation during sustained drilling work.

Published features include:

  • Hydraulic oil cooler
  • 25.4 cm cooling fan
  • Approximately 15.1 litre fuel tank
  • Honda engine options
  • Compatibility with other suitable hydraulic tools

Little Beaver lists Honda engine options of approximately 20 hp, 24 hp and 27 hp, although current engine availability should be confirmed before ordering.

The hydraulic power source may also be capable of operating compatible equipment such as:

  • Concrete saws
  • Breakers
  • Tampers
  • Hydraulic chainsaws
  • Other compatible open-centre hydraulic tools

Soil Sampling and Hollow-Stem Drilling

The swing-away drive head makes the Big Beaver particularly suited to sampling applications.

After the auger string has been advanced, the drive head can be moved away to provide access above the bore for:

  • Sampling tools
  • Split-spoon samplers
  • Soil probes
  • Hollow-stem auger tooling
  • Monitoring-well materials
  • Other investigation equipment

The rig’s raising capacity helps retrieve augers and sampling equipment from depth, while the optional auger fork supports the auger string as extensions are disconnected.

Final tooling and sampling arrangements should be selected according to the investigation method, ground conditions and applicable technical requirements.

Foundation-Repair Drilling

The Big Beaver can drill foundation-pier holes up to approximately 40.6 cm in diameter.

Its adjustable mast and narrow frame allow the rig to work close to existing buildings, where truck-mounted augers may not achieve the required position.

The system is particularly useful where:

  • Access is limited
  • Drilling must occur close to a wall
  • Eaves restrict overhead clearance
  • Existing landscaping must be protected
  • Equipment must pass through a gate
  • Interior or courtyard drilling is required
  • Large mobilisation costs are difficult to justify

The mast can be adjusted to provide drilling alignment up to 15 degrees from vertical.

Big Beaver or Handheld Hydraulic Earth Drill?

The Big Beaver is generally appropriate where the required depth, hole diameter or auger weight exceeds the practical capability of a handheld hydraulic earth drill.

Consider the Big Beaver for:

  • Deep boreholes
  • Auger extensions
  • Environmental test wells
  • Hollow-stem augering
  • Soil sampling
  • Large-diameter foundation piers
  • Mechanised auger retrieval
  • Restricted-access work requiring rig capability
  • Holes up to approximately 45.7 cm in diameter

A handheld Hydraulic Earth Drill may be more suitable for:

  • Shallower post holes
  • Fencing
  • Landscaping
  • Smaller sampling tasks
  • Frequent relocation
  • One-person drilling without a mast
  • Work where lifting capacity is not required

Compare Little Beaver Hydraulic Earth Drills

Little Beaver Big Beaver Equipment from AR+R

AR+R supplies Little Beaver Big Beaver drill rigs, hydraulic power sources, augers and supported accessories for Australian contractors, consultants and equipment users.

We can assist with:

  • Standard Big Beaver and Big Beaver XL selection
  • Standard or high-torque drive configuration
  • Hydraulic power-source options
  • D-Series augers
  • Auger extensions
  • Soil-sampling equipment
  • Hollow-stem auger arrangements
  • Auger forks and handling accessories
  • Wear components and replacement parts
  • Product information
  • Commercial quotations
Standard or High-Torque Drive? image
FAQ

Frequently Asked Questions

How wide is the Big Beaver?

The rig is approximately 66 cm wide, allowing it to pass through many gates and doorways.

How deep can it drill?

Little Beaver states that the rig can drill approximately 30.5 metres deep with a 15.2 cm auger and approximately 9.1 metres deep with a 40.6 cm auger, depending on soil conditions.

What is the largest auger it can operate?

The published maximum auger diameter is approximately 45.7 cm.

Can it drill at an angle?

Yes. The mast can be adjusted continuously from vertical to approximately 15 degrees off vertical.

Can one person move and operate it?

The Big Beaver is designed for one-person operation and portability on suitable level ground. Transport, slopes and difficult surfaces may require additional personnel or mechanical handling.

What is the difference between the Big Beaver and Big Beaver XL?

The XL has a taller mast and approximately 182.9 cm of drive-head travel, compared with 152.4 cm on the standard model.

Is a high-torque drive available?

Yes. The optional high-torque drive provides approximately 1,491 Nm at 100 rpm, compared with approximately 705 Nm at 150 rpm for the standard drive.

Can it be used for soil sampling?

Yes. The swing-away drive head, auger lifting system and compatibility with sampling and hollow-stem auger tooling make it suitable for environmental and geotechnical investigation work.

Request a Big Beaver Quote image

Request a Big Beaver Quote

Tell AR+R about your soil-sampling, environmental, foundation-repair or restricted-access drilling application and we will help identify a suitable Big Beaver rig, hydraulic power source and auger configuration.

Call: 1300 692 626
International: +61 2 4372 1422

Request a Quote