Enquire now
Wire Rope & Rigging Systems hero image
Flexible Connection Systems for HULK Earth Anchors

Wire Rope & Rigging Systems

A ground anchor is only one part of the restraint system. The anchor must ultimately connect to the structure, asset or load being secured.
Discuss Your Project Request a Quote

Complete Wire Rope & Rigging Systems

Anchoring Rope and Rigging supplies wire rope and rigging systems for HULK Earth Anchors, combining the anchor tendon, termination and connection hardware into an arrangement suited to the application.

Wire rope can be used across the HULK Earth Anchor range, from the compact HP25 through to the high-capacity HG320, with rope size, material and connection hardware selected to suit the required load, installation geometry, environmental conditions and intended design life.

Whether the requirement is a simple wire rope eye or a complete assembly incorporating shackles, turnbuckles, chain and purpose-made connection hardware, Anchoring Rope and Rigging can help configure the connection between the earth anchor and the item being restrained.

Complete Anchor-to-Structure Connections

The connection between a HULK Earth Anchor and the structure being secured can take many forms.

Unlike a rigid threaded bar tendon, wire rope provides a flexible connection that can accommodate different anchor orientations, connection points and load-path geometries.

A typical earth anchor rigging system may incorporate:

  • Galvanised or stainless steel wire rope
  • Thimbles and formed eyes
  • Swaged wire rope terminations
  • Wire rope grips
  • Shackles
  • Turnbuckles and tensioning hardware
  • Chain
  • Standard rated rigging fittings
  • Purpose-made brackets and connection hardware

The final configuration depends on the application rather than a fixed assembly.

Anchoring Rope and Rigging can supply individual components or assist with the development of a complete earth anchor connection system.

Complete Wire Rope & Rigging Systems image

Wire Rope Tendons for Earth Anchors

Wire rope can form the primary tendon between the buried HULK Earth Anchor and the connection point above ground, providing a flexible load path between the anchor and the structure, asset or restraint point being secured.

Its flexibility makes it particularly useful where a rigid tendon is unnecessary, where installation geometry varies, or where the connection needs to change direction between the anchor and the structure.

Wire rope assemblies can be configured across the HULK Earth Anchor range, from smaller tie-down applications through to high-capacity anchoring systems. The appropriate rope diameter, construction and material are selected to suit the anchor, required load, connection arrangement, environmental conditions and intended application.

A range of standard HULK Earth Anchor wire rope assemblies is available for common applications, while custom assemblies can also be configured where the project requires specific tendon lengths, terminations or connection hardware.

Selecting a Wire Rope Tendon

Key considerations include:

  • Required anchor capacity
  • Direction of loading
  • Anchor installation angle
  • Distance between the anchor and connection point
  • Need for adjustment or tensioning
  • Environmental exposure
  • Required service or design life
  • Inspection and maintenance requirements

Galvanised and stainless steel wire rope options are available depending on the requirements of the installation.

Wire Rope Tendons for Earth Anchors image

Wire Rope Termination Options

The way the wire rope terminates is just as important as the rope itself.

AR&R can configure different termination arrangements depending on how the earth anchor needs to connect to the structure or restraint point.

Thimbles & Wire Rope Eyes

Thimbles help maintain the shape of a formed wire rope eye while protecting the rope where it bears against a shackle, pin or other connection.

A thimble eye provides a simple and effective termination for many earth anchor applications and creates a defined connection point for additional rigging hardware.

Typical connections may include:

Shackles, Structural pins, Turnbuckles, Chain, Brackets, Existing structural anchor points.

Swaged Terminations

Swaged terminations provide a permanent and compact connection at the end of the wire rope.

Depending on the application, assemblies may incorporate swaged eyes or other compatible fittings to produce a purpose-built anchor tendon ready for connection on site.

Swaged assemblies are particularly useful where a consistent finished length or factory-prepared termination is preferred.

Wire Rope Grips

Wire rope grips provide an alternative method of forming or securing a wire rope termination.

They can be useful where the final rope length or connection needs to be established during installation, allowing the assembly to be adjusted to suit actual site geometry.

The number, arrangement and installation of wire rope grips must be appropriate for the selected rope and load requirements.

Rigging & Connection Hardware

Wire rope is often only one element of the final connection.

A HULK Earth Anchor system can incorporate standard rigging hardware to provide adjustment, articulation or a suitable interface with the item being secured.

Shackles

Shackles

Shackles provide a robust and removable connection between wire rope eyes and other components within the anchor system.

They can be used to connect the tendon to:

  • Structural brackets
  • Turnbuckles
  • Chain
  • Eye connections
  • Other rated rigging components

The shackle type and capacity are selected to suit the load and connection geometry.

Turnbuckles

Turnbuckles

Turnbuckles can be incorporated where the completed anchor system requires adjustment or tensioning.

They allow the effective length of the connection to be altered after installation and can be particularly useful for:

  • Guying systems
  • Tie-down arrangements
  • Structural restraint
  • Applications requiring final tension adjustment

The turnbuckle becomes part of the complete load path and must therefore be selected alongside the anchor, tendon and other connection hardware.

Chain

Chain

Chain can be incorporated into HULK Earth Anchor systems where a flexible, robust and readily adjustable connection is required.

It may be used independently or in combination with wire rope, shackles, turnbuckles and other rigging hardware to suit the required connection arrangement.

Chain can be particularly useful where straightforward adjustment, durable exposed hardware or a different service life requirement makes it preferable to a conventional wire rope connection.

Other Rigging Connections

Other Rigging Connections

Depending on the structure being restrained, Anchoring Rope and Rigging can incorporate other suitable standard rigging components or purpose-made connection hardware into the assembly.

Rather than specifying the earth anchor independently of the connection, the complete load path can be considered from the anchor through to the final structural attachment point.

Galvanised or Stainless Steel Wire Rope?

The correct wire rope material depends on more than load capacity.

Both the surrounding environment and the intended life of the anchoring system need to be considered.

Galvanised Steel Wire Rope

Galvanised wire rope provides an economical and versatile tendon option for many general earth anchoring, tie-down and restraint applications.

It is commonly suited to installations where the environmental exposure and required service period are compatible with a galvanised steel system.

Stainless Steel Wire Rope

Stainless steel wire rope may be considered where increased corrosion resistance is required or where the environmental conditions are more demanding.

However, material selection should always consider the complete anchoring assembly, including the HULK Earth Anchor, wire rope, terminations and other connection hardware.

Design Life Considerations

The design life of an earth anchoring system is not determined by the HULK Earth Anchor alone.

The anchor body, tendon, termination and connection hardware all form part of the load path and should be selected with the intended service conditions in mind.

Factors that can influence material selection include:

  • Required design life
  • Soil and groundwater conditions
  • Atmospheric exposure
  • Marine or corrosive environments
  • Whether components remain exposed
  • Accessibility for inspection or replacement
  • Anchor material and corrosion protection
  • Tendon and termination materials

For shorter-term or temporary applications, a wire rope arrangement may provide an efficient and practical solution.

Where longer design-life requirements apply, alternative tendon materials or connection systems may need to be considered.

Anchoring Rope and Rigging can assist with selecting an appropriate anchor, tendon and termination combination for the intended application.

Design Life Considerations image

Typical Applications for Wire Rope

Guying & Structural Support

Guying & Structural Support

Wire rope earth anchor systems provide a flexible connection for guyed structures where the anchor may be positioned away from the structure and loaded along an inclined load path.

Applications may include masts, poles, temporary structures and other guyed systems.

Equipment & Asset Tie-Down

Equipment & Asset Tie-Down

HULK Earth Anchors can be connected to equipment, frames and other assets using wire rope and suitable rigging hardware to resist uplift, overturning or movement.

The connection arrangement can be configured to suit existing lifting eyes, brackets or structural attachment points.

Temporary & Relocatable Structures

Temporary & Relocatable Structures

Wire rope systems can provide a practical connection for temporary structures where rapid installation, flexible geometry and straightforward removal or disconnection are desirable.

Civil & Infrastructure Restraint

Civil & Infrastructure Restraint

Where a flexible tendon is appropriate, wire rope assemblies can provide a connection between buried earth anchors and civil or infrastructure elements requiring restraint.

Selecting the Right Wire Rope & Rigging System

The wire rope tendon is only one component of the connection between a HULK Earth Anchor and the structure or asset being restrained. Depending on the application, a wire rope earth anchor system may incorporate:

  • Galvanised or stainless steel wire rope
  • Thimbles and formed eyes
  • Swaged terminations
  • Wire rope grips
  • Shackles
  • Turnbuckles
  • Chain
  • Standard rated rigging fittings
  • Purpose made brackets or connection hardware

The final arrangement will depend on factors such as the anchor selected, direction of loading, available connection points, need for adjustment and the conditions in which the system will operate.

FAQ

Frequently Asked Questions

Can wire rope be used with all HULK Earth Anchors?

Wire rope assemblies can be configured across the HULK Earth Anchor range, from the HP25 through to the HG320. Rope size, material and associated connection hardware must be selected to suit the anchor capacity and application.

Should I use galvanised or stainless steel wire rope?

The appropriate material depends on the environmental exposure, required service life and the specification of the complete anchoring system. Anchoring Rope and Rigging can assist with selecting an appropriate material for the intended application.

Can wire rope assemblies be supplied with finished eyes?

Yes. Wire rope assemblies can be supplied with formed or swaged eyes and suitable thimbles where a prepared connection point is required. Standard anchor assembly options are available with wire rope and swaged thimble eye.

Can wire rope grips be used instead of a swaged termination?

Wire rope grips can provide a practical site assembled termination where adjustment or final sizing is required. The appropriate termination method depends on the rope, load and application requirements. Standard anchor assemblies are available with wire rope and rope grips.

Can turnbuckles and shackles be included in the assembly?

Yes. Turnbuckles, shackles and other rated rigging components can be incorporated where adjustment, articulation or a suitable connection to the restrained structure is required.

Where does chain fit into an earth anchor system?

Chain can be used as a flexible connection either independently or in combination with wire rope and other rigging components. It may be selected where adjustment, connection geometry, durability or other project requirements make it appropriate.

How do I choose between wire rope and threaded bar?

Wire rope provides a flexible connection that can accommodate different connection angles and rigging arrangements. Threaded bar provides a rigid tendon and is commonly used where direct structural load transfer, load plates, eye nuts or longer design life requirements are important. The most suitable system depends on the application.

Discuss Your HULK Earth Anchor Requirements image

Discuss Your HULK Earth Anchor Requirements

Contact AR+R for assistance with product supply, anchor assemblies, installation equipment, contract installation, proof testing, supervision or training.

Call: 1300 692 626
International: +61 2 4372 1422

Discuss Your Project