Industrial Fencing
Drill post holes in clay, rocky ground and other difficult soil conditions where higher torque and reverse operation are beneficial.
Little Beaver Hydraulic Earth Drills combine higher-powered engines with the reliability, control and reversibility of hydraulic drive.
Designed for rocky ground, heavy clay and other demanding conditions, the system delivers substantially more torque than a high-speed mechanical earth drill while retaining a compact, manoeuvrable format suitable for restricted-access sites.
A steel torque tube transfers drilling reaction back to the hydraulic power unit, reducing dangerous kickback and allowing many drilling tasks to be completed by one operator. One-person, two-person and high-torque anchoring handles are available to suit different hole diameters, drilling depths and applications.
The Little Beaver Hydraulic Earth Drill uses a separate petrol-powered hydraulic power unit connected to the drill handle through quick-connect hydraulic hoses.
Hydraulic drive provides controlled auger rotation, high torque and forward/reverse operation. Reverse allows the operator to back the auger out if it becomes caught beneath a rock, tree root or other obstruction.
The standard three-wheel chassis remains separate from the operator-held drill handle. This reduces the weight carried by the operator and allows the compact system to reach areas that may be inaccessible to skid-steer-mounted augers or larger drilling equipment.
Drill post holes in clay, rocky ground and other difficult soil conditions where higher torque and reverse operation are beneficial.
Prepare holes for signs, poles, structural posts and similar installations requiring accurate, controlled drilling.
Drill larger planting holes or work in ground conditions that may be too demanding for a high-speed mechanical auger.
Use larger auger diameters or two-person handles for pole-barn posts, foundation repair and similar structural applications.
The Little Beaver Hydraulic Earth Drill provides the torque and control required for efficient installation of screw anchors, making it suitable for a range of anchoring, foundation and support applications.
Hydraulic operation provides the torque required for larger augers and more demanding soils.
Depending on the selected handle and motor, the system can be configured for different combinations of speed and torque, allowing the equipment to be matched to ordinary drilling, larger-diameter holes, deep holes or anchoring work.
A one-touch control provides both forward and reverse auger rotation.
Reverse operation helps the operator retrieve an auger that has become trapped beneath an obstruction and can make deeper or difficult drilling easier to manage.
The steel torque tube transfers drilling reaction to the hydraulic power-unit chassis rather than allowing the drill handle to twist against the operator.
This torque-control system reduces kickback and allows many normal drilling tasks to be completed by one person.
The hydraulic power unit is mounted on a three-wheel chassis with a swivelling front wheel.
Front and rear carrying handles assist with loading and unloading, while the compact footprint helps the drill reach confined or landscaped areas where larger equipment may be unsuitable.
Little Beaver snap-on augers and extensions connect without loose pins or separate tools.
A spring-loaded snap button secures the auger to the drive adaptor while allowing it to be removed or changed quickly.
One-person, two-person and high-torque anchoring handles allow the same hydraulic power unit to support a broad range of drilling and anchoring applications.
The torque tube connects the drill handle to the power-unit chassis and absorbs the rotational reaction created when the auger encounters resistance.
This reduces kickback at the operator handles and is the central feature enabling controlled one-person drilling.
A hydraulic pressure-relief valve protects the system by limiting pressure when the auger is overloaded or encounters an obstruction.
The handle control returns automatically to neutral when released, helping provide controlled forward and reverse operation.
Quick-connect fittings simplify connection of the selected drill or anchor handle to the hydraulic power unit.
The hydraulic system incorporates a return filter, inlet suction strainer and oil-level sight gauge to support fluid cleanliness and routine inspection.
The operator can control auger direction directly from the handle without returning to the hydraulic power unit.
Little Beaver Hydraulic Earth Drills accept snap-on augers in diameters from approximately 38mm to 406mm.
Standard auger lengths include approximately:
91cm 107cm
Snap-on tube and full-flighted extensions are available where greater drilling depth is required. Under suitable soil conditions, the hydraulic drill can reach depths of approximately 9.1 metres using augers of 305mm diameter or smaller.
Available auger configurations may include:
The appropriate auger should be selected according to:
Little Beaver Hydraulic Earth Drills are available in two hydraulic power-unit options.
The HYD-PS11H uses a Honda GX340 engine rated at 8.0 kW net.
It provides hydraulic flow of up to approximately 26.5 litres per minute and can support standard drilling handles, two-person handles and anchor-drive equipment.
The HYD-PS13H uses a Honda GX390 engine rated at 8.7 kW net.
The published hydraulic output, auger-speed range and handle compatibility are the same as the HYD-PS11H, with the larger engine providing additional available power
| Specification | HYD-PS11H | HYD-PS13H |
|---|---|---|
| Engine Brand / Model | Honda GX340 | Honda GX390 |
| Engine Power at 3,600 rpm | 8.0 kW net | 8.7 kW net |
| Engine Torque | 26.4 Nm net | 26.5 Nm net |
| Fuel Tank Capacity | 6.1 L | 6.1 L |
| Oil Alert System | Standard | Standard |
| Starting | Recoil | Recoil |
| Maximum Hydraulic Flow | 26.5 L/min | 26.5 L/min |
| Forward / Reverse | Standard | Standard |
| Available Auger Speed Range | 60–235 rpm | 60–235 rpm |
| Available Auger Torque Range | 230–515 Nm | 230–515 Nm |
| Hydraulic Pressure | 18.6 MPa | 18.6 MPa |
| Hydraulic Reservoir Capacity | 18.9 L | 18.9 L |
| Return Filter | 10 micron | 10 micron |
| Inlet Suction Strainer | 100 US mesh | 100 US mesh |
| Oil-Level Indicator | Sight gauge | Sight gauge |
| Dimensions with Wheel Kit, L × W × H | 119.4 × 61 × 61 cm | 119.4 × 61 × 61 cm |
| Dry Weight | 93 kg | 93 kg |
Note
Product specifications and available model configurations may change. Confirm the required power unit, handle, motor, auger and attachment combination with AR+R before ordering.
A Hydraulic Earth Drill is generally the better choice where ground conditions, hole diameter or drilling depth require more torque and control.
Consider a Hydraulic Earth Drill for:
A Mechanical Earth Drill may be preferable for:
Little Beaver characterises its Mechanical Earth Drill as the higher-speed choice for light-to-medium drilling, while the Hydraulic Earth Drill provides greater torque for rocky, clay-rich or otherwise difficult ground.
View the Little Beaver Mechanical Earth Drills
Little Beaver Hydraulic Equipment from AR+R
AR+R supplies Little Beaver Hydraulic Earth Drills, power units, handles, augers and attachments for Australian contractors, businesses and equipment users.
We can assist with:
To help identify an appropriate configuration, provide:
Yes. Many normal drilling tasks can be completed with the one-person handle. The steel torque tube transfers drilling reaction to the power-unit chassis and reduces kickback.
Hydraulic drills provide more torque, reversible rotation and better performance in rocky, clay-rich or difficult ground. Mechanical drills generally offer faster drilling in easier soil conditions.
Little Beaver offers augers from approximately 38mm to 406mm in diameter. Larger augers generally require the two-person handle.
Yes. Forward and reverse operation is standard, allowing the operator to back the auger out if it becomes caught beneath an obstruction.
Yes. Sampling augers, tripod equipment and other specialist accessories are available for soil-sampling, environmental and geophysical work.
AR+R can assist with hydraulic power units, handles, augers, extensions, anchor adaptors, sampling equipment and supported replacement components.
Tell AR+R about your drilling, anchoring or soil-sampling application and we will help identify a suitable Little Beaver hydraulic power unit, handle, motor and attachment configuration.
Call: 1300 692 626
International: +61 2 4372 1422